Power Grow Reverse Osmosis System Growmax Water

The Power Grow reverse osmosis system produces up to 500 litres per day (up to 20 litres per hour), perfect for hydroponics and gardening.

Removes up to 95% of salts, heavy metals and other potential contaminants. Removes up to 99% of chlorine and reduces sediment larger than 5 microns instantly.The Power Grow reverse osmosis system produces up to 500 litres per day (up to 20 litres per hour), perfect for hydroponics and gardening.

Removes up to 95% of salts, heavy metals and other potential contaminants. Removes up to 99% of chlorine and reduces sediment larger than 5 microns instantly.

For ultra pure water of 000 PPM, you can use De-Ionization Kit .

For optimum water production conditions, you can use Pressure Pump Kit Powergrow and Maxquarium (422113).

Benefits of Power Grow

Reverse Osmosis systems are designed to minimise water wastage to the drain, with a ratio of approximately 2:1 (bad water/good water).

• Removes up to 95% of salts in the water.
• Less water waste than other equipment
• Easy indoor and outdoor installation

Helps stabilise pH, achieves 100% effectiveness of nutrients and fertilisers, and protects organisms. Ideal for organic crops.

Removes and/or reduces: salts, heavy metals, chloramines, nitrates, nitrites, chlorine, sediments, soil, oxides, herbicides and pesticides, volatile organic pollutants (chemical pollutants, benzene, oils, trihalomethanes, detergents, PCB's).

How many litres per hour does the Power Grow filter?

The Power Grow provides 20 litres per hour, which means 500 litres per day. This is practically distilled water which allows the plants to absorb nutrients more easily and generate better production.

Conditions for using the Power Grow

To guarantee the optimal functioning of this GrowMax Water osmosis filter, a water pressure of 4BAR is required. A pressure pump is a good idea, which will also help to reduce the amount of water that goes down the drain.

Water conditions

• Temperature: 25ºC
• Pressure: min. 3 Kg max. 6kg
• Quality (500 ppm TDS)

Other conditions may reduce water production.

Filter changes should be made approximately every 4-6 months or every 4,000 litres of osmosis water produced.

De-Ionization Kit and spares to add to any reverse osmosis system when ultra pure 000 ppm water is required.

Use with Pump Kit

To get the most out of your osmosis system, it is recommended to use a pump kit, so that the pressure is maintained and you get the performance indicated by the manufacturer. These kits should be fitted to the osmosis water inlet.

•  Pressure Pump Kit Powergrow and Maxquarium (422113)

For better performance you can also use a Buoy Kit, so that it sends a signal to the pump when it should stop working when the water reaches a certain level. This avoids spillage or excessive watering.

•  Safety Buoy Kit (422114)

Spare parts

It is recommended to change the filters every 4,000 litres of osmosis water produced. To set up your Power Grow osmosis you need:

• 1 x Replacement Filter Pack 10" (422102)
• 1 x Power Grow 500 High Flow 150GPD (422106)