GANATIK Trimmer G2000 – Professional Dual-Drum Trimming Machine

Professional trimming system with dual drums, razor-style blades and adjustable suction

The GANATIK Trimmer G2000 is a professional dual-drum trimming machine designed to optimize the post-harvest processing of cannabis flowers. Its system combines rotating drums, razor-style blades and adjustable suction to provide a trimming process that can be adapted to the characteristics of each batch.

Thanks to its two independent processing tunnels, the G2000 allows operators to work with alternating feeding or use both sides simultaneously. This helps reduce manual trimming work and improve overall processing efficiency.

The machine is designed to process both fresh and dry flowers, using the same drum system and adapting the operating parameters through its adjustable controls.

The GANATIK G2000 is CE marked, manufactured from stainless steel and food-contact-suitable materials, and designed for professional post-harvest applications and GMP-ready processing environments. It also comes with a 5-year warranty.

Dual-drum technology

The G2000 features two independent feed hoppers, each connected to its own rotating drum.

During operation, the flowers move through the drums while rotating. Leaves and exposed plant material are drawn towards the drum slots by the suction system and then guided towards the cutting area.

This dual-drum design allows operators to:

• Work with a single drum.
• Feed both drums simultaneously.
• Alternate material between the two hoppers.
• Maintain a more continuous workflow.
• Adapt processing speed to the requirements of each batch.

The dual-drum configuration is designed to increase processing capacity and reduce reliance on manual trimming.

Razor-style cutting system with integrated suction

One of the key features of the GANATIK G2000 is its combined suction and cutting system.

The two fans generate the airflow required to draw plant material through the drum slots towards the cutting blades. Once the material reaches the cutting area, the razor-style blades cut the exposed leaves.

The intensity of the process can be adjusted using the machine's controls, allowing the system to be adapted to different flower types.

The ability to regulate both suction and blade speed makes it possible to work with different moisture levels, densities and flower structures.

Adjustable trimming control

Every batch can have different characteristics. Flower size, density, genetics, moisture content and the desired finish can all influence the trimming process.

For this reason, the G2000 allows operators to control several parameters:

• Drum speed: 4-position selector.
• Blade and suction speed: adjustable potentiometer from 1 to 8.
• Feeding speed: controlled by the rate at which material is introduced.

A slower feed rate keeps the flowers inside the system for longer and can provide more intensive trimming.

A faster feed rate increases processing speed and can be suitable when a lighter trimming action is preferred.

The settings should always be adapted to the characteristics of the material and the desired trimming result.

Fresh and dry trimming with one machine

The GANATIK G2000 is designed to process both fresh and dry flowers using the same main drum system.

There is no need to replace the drums when changing between these two processing conditions. The trimming result is primarily adapted by adjusting the machine's operating parameters.

Fresh flowers

Fresh material will generally require different settings from dry material. As a starting point, higher suction and blade-speed settings may be used, with the final configuration adjusted according to the characteristics of each batch.

Dry flowers

Dry flowers generally require gentler treatment. Suction and blade speed can be reduced to adapt the process to the structure and moisture content of the material.

For both methods, the settings should be adapted according to:

• Genetics.
• Flower size.
• Density.
• Moisture content.
• Material volume.
• Desired finish.

Drum self-cleaning system

Maintenance is an important part of operating trimming equipment, particularly when processing resin-rich material.

The GANATIK G2000 incorporates a system designed to simplify drum cleaning and reduce maintenance time.

The drum section can be separated from the cutting section and placed in the included cleaning container. During cleaning, the drums rotate slowly inside the cleaning liquid while the brush system helps remove plant residues and resin build-up from their surfaces.

This makes it easier to prepare the machine for the next batch and maintain clean working surfaces.

Important: always switch off the machine and completely disconnect it from the electrical supply before carrying out any cleaning, maintenance or manual intervention.

Designed for professional workflow

The G2000 is intended for professional post-harvest operations requiring a stable, adjustable machine capable of processing different types of material.

Its configuration includes:

• Stable support frame.
• Two feed hoppers.
• Two rotating drums.
• Two cutting units.
• Four razor-style blades.
• Two fans.
• Integrated suction system.
• Waste collection bag.
• Adjustable controls.
• Drum cleaning system.
• Lockable swivel castors.

The wheels make it easier to move the machine around the facility and lock it securely during operation.

3-in-1 functionality

The GANATIK G2000 can be integrated into different stages of post-harvest processing thanks to its multifunction configuration:

1. Fresh trimming

Processing freshly harvested flowers using settings adapted to fresh material.

2. Dry trimming

Processing previously dried flowers using the same drum system and adjusting the operating parameters accordingly.

3. Kief and trichome collection

The machine can be equipped with an optional kief collection kit, designed to collect trichomes present in the biomass generated during the trimming process.

Main advantages of the GANATIK G2000

• Dual-drum design for increased processing capacity.
• Processes fresh and dry flowers with the same machine.
• Razor-style blades for cutting exposed plant material.
• Integrated, adjustable suction.
• Independent adjustment of drum, blade and suction operation.
• Drum cleaning system to simplify maintenance.
• Two independent feed hoppers.
• Alternating or simultaneous feeding.
• Stainless-steel construction.
• CE marking.
• 5-year warranty.
• Lockable swivel castors for easier movement.
• Optional kief collection kit.

6 key benefits

1. Process with dual drums

The two independent drums provide two processing lines, helping create a more continuous workflow and reducing the amount of manual trimming required.

2. Adapt the process to each batch

Adjustable drum speed, blade speed and suction allow the machine's operation to be modified according to the characteristics of the flowers and the desired finish.

3. Fresh and dry trimming

One machine can process fresh or dry flowers without replacing the main drum system.

4. Control trimming intensity

Feed rate, drum speed, blade speed and suction intensity can be adjusted to achieve gentler or more intensive trimming.

5. Simplified cleaning

The dedicated drum-cleaning system, combined with the brushes and cleaning container, helps reduce manual maintenance work.

6. Make use of generated biomass

With the optional kief collection kit, the G2000 can also be integrated into a workflow designed to collect trichomes present in the material generated during trimming.

Main features

• Professional dual-drum trimming machine.
• Designed for fresh and dry flowers.
• Two independent feed hoppers.
• Two rotating drums with a 22 cm diameter.
• 102 cm drum length.
• Two cutting units.
• Four razor-style blades.
• Two fans.
• Integrated suction.
• Adjustable drum speed.
• Adjustable blade and suction speed.
• 4-position drum-speed selector.
• Blade and suction potentiometer from 1 to 8.
• Manual feeding.
• Two-hopper feeding system.
• Waste collection bag.
• Drum cleaning system.
• Brush system.
• Stable frame.
• Lockable swivel castors.
• Stainless-steel construction.
• CE marking.
• 5-year warranty.
• Optional kief/trichome collection kit.

How the GANATIK G2000 works

The process starts by introducing flowers through one or both feed hoppers.

Each hopper directs the material into a rotating drum. As the drum rotates, the flowers gradually move towards the outlet.

The suction system generates airflow that helps draw plant material through the drum slots. Leaves reaching the cutting area are processed by the razor-style blades.

The flowers continue towards the outlet while the separated material is directed towards the collection area.

The operator can adjust the machine using:

1. Drum speed.
2. Blade speed.
3. Suction intensity.
4. Material feed rate.

This configuration allows the trimming process to be adapted to different batches and working conditions.

Cleaning and maintenance

To simplify maintenance, the drum section can be separated from the cutting area and placed in the included cleaning container.

The drums rotate slowly inside the cleaning liquid while the brushes help remove plant residues and resin build-up.

Regular cleaning helps keep working surfaces in suitable condition and prepares the machine for the next batch.

Before cleaning, dismantling or handling any component, switch off the machine and disconnect the power cable from the electrical supply.

Always use cleaning products and procedures compatible with the machine's materials and follow the manufacturer's specific instructions.

Technical specifications

Frequently asked questions

Can the GANATIK G2000 process fresh and dry flowers?

Yes. The machine is designed to process both fresh and dry flowers using the same drum system. Speed and suction settings should be adapted to the condition and characteristics of the material.

Do the drums need to be changed for dry trimming?

No. According to the supplied configuration, the G2000 uses the same drum system for both fresh and dry processing.

Can the blades and suction be adjusted?

Yes. Blade speed and suction intensity are adjusted using a potentiometer with settings from 1 to 8.

How many drums does the machine have?

The GANATIK G2000 has two independent drums, each connected to its own feed hopper.

Can both drums be used at the same time?

Yes. The machine can be fed through one side, the other side or both simultaneously. Alternating feeding can also be used to maintain a more continuous workflow.

What is the processing capacity?

The stated capacity is up to 50 kg/h for fresh material and up to 15 kg/h for dry material. Actual throughput may vary depending on the material characteristics and operating settings.

How is the machine cleaned?

The drums can be separated from the cutting section and cleaned using the dedicated system supplied with the machine, including the cleaning container, adapters and brushes.

Does it include the kief collection system?

The kief collection kit is optional. The machine can be configured to collect material generated during the trimming process.

Does the G2000 have CE marking?

Yes. The machine carries CE marking and is designed for professional post-harvest applications.

What warranty does it have?

The GANATIK G2000 comes with a 5-year warranty.

Can the machine be moved easily?

Yes. It is equipped with lockable swivel castors, allowing it to be moved around the facility and secured in the required working position.

Where can it be used?

It is specified for dry indoor environments and outdoor use only under dry conditions. The stated protection rating is IP55 without the electrical box.